- Watch kahin to hoga all episodes how to#
- Watch kahin to hoga all episodes install#
- Watch kahin to hoga all episodes manual#
You can enable “Wipe Wall” to add extra shell(s) around the model during dual-extruder printing. Raise3D recommends maintaining the “Extruder Amount of Extruder-Switch” between 2-4mm for any standard filament types, and from 6-10mm for Raise3D Premium PLA type of filament.
– The extruder retraction’s amount can be edited under the “Ooze” tab. Although Raft is not recommended to use for PVA and flexible filament types. These structures include Raft, Brim, Skirt. – Further, on the menu tabs, with the “Platform Additions” option, you can also select your extruder and platform structure choice. The software will also notice when this is not needed due to having support from other models. – One thing to note is that the ideaMaker software can identify when the nozzle models will require support, such as when a model is floating off the bed without having a support structure. – Under the “Advanced Settings” menu, you can also which nozzle do you want to work with and other options such as support structure, support speed, all these under the “Support Tab”. – To access the advanced settings, double click on a printing template in the “Select Template” window and click the “Advanced” button. You can either choose the left or right nozzle in there too. Note: There is the option to set the extruders through the “Model Info” menu located in the main window. – Next, press the ‘Start’ button, select your printing template, then open the ‘Per-Model Extruder’ tab to set the nozzle settings per extruder. Note: This can be in the “Position” pop up menu. – To align multiple models to their original position with each other (as defined during the modeling process) access the “Align Together” feature on your screen. – Note: There are multiple colors available for different nozzles’ printing range To enable the printing range, access the menu “View” > and then select the “Show Extruder’s Printing Range” option. To view this range when aligning models, make sure to enable this feature. – It is important to note that each nozzle has a different printing range. – See the images below to have a graphic reference for this process. – Next, input your filament type for both, the left and right extruders.
– Make sure to verify that your printer has its extruder count set to 2. – Access to your ideaMaker software and go to the menu Printer > Printer Settings > and select Extruder Count.
Watch kahin to hoga all episodes how to#
Note: For more information about loading/unloading and storage procedures for filament, refer to How to Load & Unload Filaments in the Pro2 Manual. – Load your material by using the utility menu on the touchscreen.
Watch kahin to hoga all episodes install#
– Install your two filament spools onto the spool holders located on the right side of the printer.
Watch kahin to hoga all episodes manual#
These can be found in the manual procedures of the Pro2 3D printer. As a general recommendation before continuing with this step, Raise3D recommends following the procedures on how to calibrate the 3D printing nozzle, and how to calibrate the 3D printing nozzle height to verify that the calibration and the height of these nozzles are properly aligned.